|
The software SET-UP Tyre is divided into four main areas: |
 |
In the first area will be inserted main dimensions of
your kart . These measures are easily detected and are useful
to assess the distributions of weight of your kart. In addition to
these measures must be entered weight and height of the driver. |
 |
The second area is dedicated to the setup that you have on your kart,
you must enter the settings for camber and caster and
widths of the front and rear . In addition to these measures
must enter the tyre pressures that you are using. |
 |
The third area is dedicated to gear ratios and transmission
final . You will just have to enter the numbers of the teeth of
various gears and sprocket and pinion. |
 |
In the fourth area, you must simply select the file
that you've exported from your acquisition and tell at the software
which acquisition is used (2D, Aim, Alfano, Starlane, Rks, Unipro).
You must also enter the optimal values of reference for
your kart and for the feeling of your driver. |
|
Afterwards we will see in detail the different areas. |