After analyzing the carburation that is obtained with your
calibration, the software SET-UP Carburetor Power provides all the
indications to optimize it and therefore obtain the maximum
performance from the engine in any driving condition.
For first, it shows you a
table that shows you the effects of any setting change to
the carburetion. For example, if you switch from a throttle
valve of 50 to a 45 (-5) the carburetion will become richer
by 8.6% at the start of opening, 5.4% to 25% of opening, and
so on for the different openings, and for each calibration
element.
Thanks to this table it will therefore be very easy to
understand what to do to improve the carburetion. If, for
example, from the analysis of the carburetion, coming out of
the slow corners, you find yourself in this situation:
You see that you have to rich the carburetion of 1.5%
between 0 and 25 until to 7.1% at full load, so in this
case, based on the table generated with the setting entered,
you can work on the idle jet (1 more point will rich of 2.4%
in the first opening), on the atomizer or on the needle
notch to rich between 25 and 75 (1 point more of atomizer
will rich of about 2% in this phase), and on the main jet to
rich at full load.
This is just one example, but thanks to the table, you can act in
multiple ways to arrive at the optimal situation by finding the
solution that best meets your needs for the different driving
conditions that the characteristics of the track require. In fact,
due to its characteristics, the carburetor cannot satisfy all the
situations in the same way, so it is necessary to play with all the
calibration elements to find always the best compromise appropriate
to the driving and track needs that you have, and this is only
possible with the help of our software because even with so much
experience the possibilities are really many and the help of a
professional tool, technical and trade leader, such as SET-UP
Carburetor, is fundamental.
In addition to the help table for choosing the modifications
that should be made, the software SET-UP carburetor Power
directly calculates a new carburetor setting indicating the
changes to be made to quickly reach the optimal carburetion.
The calculation recommends the changes that are easier to
make, this is essential to be able to manage the carburetion
easily during the race week end where the time available is
always short and the weather conditions change continuously
during the day.