In addition to the functionality of the automatic calculation of the compression ratio, the height of squish
and the exhaust opening to vary of the thickness of the gaskets,
the software SET-UP TWO STROKE both for compression ratio and
for opening of the exhaust port, will
immediately calculate the value in different units available, this can
be useful to know the compression ratio of knowing the volume of the
combustion chamber and vice versa, or to know the angle of the exhaust
note its distance from TDC and vice versa.
|
 |
 |
|
|
If you have a thermocouple for detecting the temperature of the exhaust gases is possible to enter the value that
you've in maximum power, otherwise the software can work equally. |
 |
In addition to the data of the engine is possible to enter
the data concerning gasoline and mixture used. In the
software are already pre-setted the data of the gasoline on
trade, anyway if you use special gasoline we'll give you the
data to enter for these gasolines. |
 |
Moreover at these data, in the software you can enter the data for the final drive ratio and the maximum speed that you have
on the track where you want to optimize the setup. Since that the changes in the weather
modify significantly
the engine performance, thanks to these data, the software will calculate how to change the gear ratio to
have the best use of the engine under the new conditions. |
|
|