SET-UP TWO STROKE - data entry

In addition to the functionality of the automatic calculation of the compression ratio, the height of squish and the exhaust opening to vary of the thickness of the gaskets, the software SET-UP TWO STROKE both for compression ratio and for opening of the exhaust port,  will immediately calculate the value in different units available, this can be useful to know the compression ratio of knowing the volume of the combustion chamber and vice versa, or to know the angle of the exhaust note its distance from PMS and vice versa.
SET-UP TWO STROKE - Calculation Compression Ratio and Exhaust Port Opening - by NT-Project SET-UP TWO STROKE - Calculation Compression Ratio and Exhaust Port Opening - by NT-Project

If you have a thermocouple for detecting the temperature of the exhaust gases is possible to enter the value that you've in maximum power, otherwise the software can work equally.

 
Software SET-UP TWO STROKE - Carburation - Ignition Timing - Heat Range - Spark Gap - Optimal fine tuning for two stroke engine by NT-Project In addition to the engine data, in the software you can enter the data for the final drive ratio and the maximum speed that you have on the track where you want to optimize the setup. Since the changes in the weather varies significantly the engine performance, thanks to these data, the software will calculate how to change the gear ratio to have the best use of the engine under the new conditions.