|
NEEDLE and
ATOMIZER KART CARBURETOR |
 |
The needle is the heart of a carburetor used in kart, In
fact, by the needle depends the carburetion at the
different openings of the throttle and consequently the
dispensing and the acceleration of the engine that as is
known are crucials. |
|
|
USE FREE or WHIT REGISTRATION - FOR ALL DEVICES |
|
The carburettors used in
karting are derived motorcycle therefore the different
geometries of the needles were born more for motor bikes
and scooters that for the karts, therefore among many
needles available to find the ones that best meet the
needs of kart engines is much important. For each needle
is then coupled the atomizer most appropriate and you
must also choose which notch use in the needle. All this
has always been done trial and error and with the help
of tables of geometry needles.
Thanks to this utility for your kart carburetor, choose
which needle, with which notch to use it, and with which atomizer, there
will be a little easier, in fact you can quickly compare to
each throttle opening, the passage that offer different
coupling needle atomizer and then figure out what may
be more suitable to your needs kart. You'll just have
select the needle, the atomizer, the notch and the utility will
show the passage diameter which has the opening of
throttle selected, the more the number is high, it means that more
Gasoline will flow enriching the fuel mixture, it will conversely
less and there will be a leaning, then comparing two solutions
you can immediately understand at the different openings which enrich and what
leans and immediately make the choice based on the needs of your
kart.
|
|
In the version Basic after to have selected the needle, the
atomizer, the notch, the utility you'll show the
diameter of passage that there is at the throttle opening selected |
In the version Pro after to have selected the needle, the
atomizer, the notch, the utility you'll show directly the
diameter of passage that there is at the different throttle opening |
|
 |
More the number is high, it means that more
Gasoline will flow enriching the fuel mixture, it will conversely
less and there will be a leaning, then comparing two solutions
you can immediately understand at the different openings which enrich and what
leans and immediately make the choice based on the needs of your
kart.
Go to the Web-App by clicking the link below! |
To use the Web-App VHSH30-PRO is necessary register you.
Incorrect data will not be accepted |
| SIGN UP |
|
|
|
| 60 BABY - BABY ROK - PHBN14 |
60 MINI - MINI ROK - PHBG18 |
KZ1 - KZ2 - ROK GP - KGP - VHSH30 |
KZ1 - KZ2 - ROK GP - KGP - VHSH30 -PRO |
|
|
|
PROFESSIONAL SOFTWARE ADVISED |
|
|
|
| |
|
