The scooter sector is one of the more live in terms of
technology, competitions and tuners. In this context, have a carburetion optimal under all
conditions is fundamental both to take advantage of the work done, and to prevail when the
regulatory restrictions make crucial a good calibration. We've developed the software for
all major categories, thus allowing everyone to optimize the carburetion in few seconds.
For those who are inexperienced, the software is a true guide, through which we avoid
moving in the wrong direction, do not jeopardize reliability and performance. For those
who have already experienced of carburetion the software allows to be much faster in
making refinements to the changing conditions.
We don't know the regulation in the
different countries, but below you can see like the
software SET-UP Carburetor has been developed for all
the main model of carburetor and for all the main
categories of motorsport then if you don't see your
model write us to have information. |
F.M.I |
|
SCOOTER |
|
|
The technical regulations impose the use of
carburetors with a maximum diameter of 19 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBG19, Malossi PHBG19, Polini CP19,
Pinasco PHBG19, Stage6 PHBG19, Polini PHBG19, etc.) |
|
|
|
|
|
NATIONAL TROPHY SCOOTER VELOCITA' MALOSSI |
|
ScooterMatic |
SuperScooter e
Maxi |
ScooterMatic Replica |
In this category the only permissible is the
carburetor Dellorto MALOSSI PHBG19 BS for this
NT-Project has developed a version dedicated to
scooters with this carburetor |
In this category the only permissible is the
carburetor Dellorto MALOSSI PHBG21 BS for this
NT-Project has developed a version dedicated to
scooters with this carburetor |
In this category's technical regulations demand the
use of carburetors with a maximum diameter of 19 mm
or 25 mm for this NT-Project has developed the
software SET-UP Carburetor for all the main
carburetors with these diameters and also for
derivative versions more used |
|
|
|
|
POLINI CUP |
|
70 OPEN ruote 12/14" |
70 OPEN motore Minarelli |
70 OPEN ruote 10" |
The technical regulations impose the use of
carburetors with a maximum diameter of 21 mm for
this NT-Project has developed the software SET-UP
Carburetor for all major carburetors with this
diameter and also for derivative versions most used
(Dellorto PHBG21, Malossi PHBG21, Polini CP21,
Pinasco PHBG21, Stage6 PHBG21, Polini PHBG21, etc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of 28 mm for
this NT-Project has developed the software SET-UP
Carburetor for all major carburetors with this
diameter and also for derivative versions most used
(Dellorto PHBH28, Dellorto VHST28, Keihin PWK28,
Motorforce PWK28, Stage6 VHST28, etc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of19 mm for this
NT-Project has developed the software SET-UP
Carburetor for all major carburetors with this
diameter and also for derivative versions most used
(Dellorto PHBG19, Malossi PHBG19, Polini CP19,
Pinasco PHBG19, Stage6 PHBG19, Polini PHBG19, ecc.) |
|
|
|
70 OPEN over 170 kg |
VESPA |
|
The technical regulations impose the use of
carburetors with a maximum diameter of 24 mm for
this NT-Project has developed the software SET-UP
Carburetor for all major carburetors with this
diameter and also for derivative versions most used
(Mikuni TM24, Dellorto VHST24, Polini CP24, Stage6
VHST24, ecc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of 24 mm for
this NT-Project has developed the software SET-UP
Carburetor for all major carburetors with this
diameter and also for derivative versions most used
(Mikuni TM24, Dellorto VHST24, Polini CP24, Stage6
VHST24, ecc.) |
|
|
|
|
|
STAGE 6 CUP |
|
< 155 Kg |
> 155 Kg < 170 Kg |
> 170 Kg |
The technical regulations impose the use of
carburetors with a maximum diameter of 19 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBG19, Malossi PHBG19, Polini CP19,
Pinasco PHBG19, Stage6 PHBG19, Polini PHBG19, etc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of 21 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBG21, Malossi PHBG21, Polini CP21,
Pinasco PHBG21, Stage6 PHBG21, Polini PHBG21, etc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of 28 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBH28, Dellorto VHST28, Keihin
PWK28, Motorforce PWK28, Stage6 VHST28, etc.) |
|
|
|
|
NATIONAL CHAMPIONSHIP VELOCITA' VESPA e LAMBRETTA |
|
Vespe Telaio Piccolo |
Vespe PX e Lambrette |
|
The technical regulations impose the use of
carburetors with a maximum diameter of 26 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBH26, Dellorto
PHBL26, Dellorto VHST26, Dellorto SI 26-26, Stage6
VHST26, etc.) |
The technical regulations impose the use of
carburetors with a maximum diameter of 30 mm for
this NT-Project has developed the software SET-UP
Carburetor for all the main carburetors with this
diameter and also for the derivative versions most
used (Dellorto PHBH30, Dellorto VHST28, Dellorto
PHBE30, Dellorto VHSH30, Keihin PWK28, Stage6
VHST28, etc.) |
|
|
|
|
|
|