|
|
How
it works? |
|
|
The jetting of a carburetor, particularly in the racing
field, has always been one of the most difficult stages and
at the same time the most important for the the fine tuning
of the engine, so is that the mechanics really good at this,
have always been few, this is simply because the carburetor
is very complex and over the years has complicated more and
more, so it's hard to find the right solution especially in
competitions where everything counts up to one thousandth
!!! Always has been tried with formulas, diagrams, etc.. to
give an help for jetting, but always the problems were, and
still today that the formulas and diagrams have been
replaced by spreadsheets, by app, etc. just look at any
forum and you'll again see the same problems, this is
because being a complex problem or you study it deeply, or
otherwise the aid is related. NT-Project thanks to its
experience thermo-fluid dynamics, has been able to study and
model in detail the two aspects that determine the jetting,
namely the fluid-dynamic behavior of each circuit of the
carburetor, but especially the dynamic demand that the
engine makes in operation. This second aspect, being
difficult to analyze is almost never considered adequately,
but it is fundamental to have the optimal indications for
each degree of throttle opening, for all load conditions,
and at each speed, because in racing isn't important to be
ok only at the end of the straight, but in all the meters of
the track. SET-UP Carburetor therefore has a very
sophisticated technical heart ideal for all those who want
to get an help in a manner professional and adequate, it is
no coincidence that even good mechanical use it, but do not
tell it all around!!! |
|
Versions |
BASIC |
|
In a 2-stroke engine
jetting plays a key role in getting the best performance
from the engine, so it is important to identify the optimum
jetting according the engine specifications, the driver and
the characteristics of the track, and also it is crucial to
be winner adapt continuously jetting according to weather
conditions. SET-UP Carburetor Basic is the basic version of
the Professional version and allows you to determine the
optimum jetting depending on the characteristics of engine,
the type of filter and the weather conditions. Calculates
the effects of all the elements of calibration and shows how
in every condition of throttle opening, loading and speed,
your carburetor responds with respect to the optimum
carburetion, thus you can act on the elements of calibration
to optimize in a secure manner your jetting and always get
the maximum power from your engine.
|
|
|
PROFESSIONAL |
|
When you are
competing every detail is crucial and the time available to
improve is always short, so in addition to the experience to
have a professional instrument on your side that simplifies
the work, saves time in the choices, takes you on the road
immediately right, it is essential to overcome opponents.
SET-UP Carburetor Professional does all this, it allows you
to have complete management of the jetting, according to the
engine, to its level of tuning, his setting of ignition,
compression, timing, type of filter, the driving style of
the driver, to the characteristics of the track, the
vehicle's weight, and obviously as a function of atmospheric
conditions. Also allows you to compare two calibration,
allows you to take as a reference its own jetting and adjust
it to new conditions, and especially will automatically
calculate a series of settings that optimize the jetting by
varying the main elements of calibration. |
|
|
|
|
Since that in the competition research to improve is
limitless, NT-Project has created a version just for those
who in addition to optimizing their material is looking for
new solutions that can possibly add something to the
development and performance. Often happened to see in the
most prestigious races, then with the better for everyone,
from the engines, the tuners, the mechanics, the driver,
etc., that between two calibration both optimal, one gave a
little more, and the most obvious explanation is that the
jetting married better with the style of the driver or of
the characteristics of the track, and this is very true, but
beyond that there are also technical reasons that
distinguish the settings and the fact of providing an
optimal carburetion. NT-Project thanks to its technology
thermo-fluid dynamics has deepened this aspect and
identified two other aspects which distinguish the
calibration, the response time, and the fuel emulsion that
each calibration is able to provide. SET-UP Carburetor
Experience then added to all that you have seen in the
Professional version, the computation of these two
quantities allowing you to find the best of the best
solution to suit your needs. |
|
|
|
ANALYSIS |
|
|
The choice of the
coupling needle - atomizer is one of the most important
things to have optimum operation of the carburetor according
to the characteristics of the engine, the driving style of
the driver and the characteristics of the track, for this
NT-Project has made Carburetor Analysis allowing you to
analyze the behavior of each coupling needle - atomizer and
moreover automatically find which needle allows to satisfy
your needs for carburetion to different throttle openings.
It also makes one thing unique, and namely it calculates how
you must readjust the main jet when changing type of needle
and atomizer. In fact, each needle and each atomizer
determine a different fluid loss in the circuit of the
maximum, therefore, to have the same fuel mixture at full
load is required a specific main jet. |
|
|
|
System Requirements |
Support |
User License |
The software can be used on any computer with Windows operating system. It 'was designed to be used on screens with minimum resolution 800 x 600 pixels, so it can be easily used even on small notebook or netbook. |
|
NT-Project follows you at all stages, from installation, to the early stages of use, both
to give you advice on the operation, and to give you guidance as to the most suitable settings for your case, so as to allow you to take full advantage of the high potential of the software. |
|
The license to use the software allows 2 installations, furthermore in case of computer failure it's possible a re-installation within 24 months. |
FAQ |
|
|
Models |
|
|
|